→產品特點

德國羅博特（RBT）品牌：進口燃氣緊急切斷閥閥斷電后、迅速關閉；閥再次通電，不會自動打開。必須靠手動拉起閥門，保持打開伏態；節能、線圈保持功耗15W、溫度不超過10℃、可長期通電口；密封性好、零泄漏。

Germany Robert RBT imported gas fast cut off valve Product characterislic, valve power failure, after rapid closing valve,again energized,not automatically open,must rely on manual pull valve,remains open:energy-saving,coif to maintain the power 15W,temperature of not more than 10 DEsC,can be long-term electricityGood seal,zero leakage.

→應用范圍

工業爐窯、燃氣管網、燃氣處理廠、加氣站、燃氣泄漏報瞥系統、消防報警系統等城市或工廠易燃易爆介質切斷;當發現事故隱患時快速切斷，及時制止惡性事故發生。

Scope of application:industrial furnace,gas pipeline network,gas processing plant,gas station,gas leakage alarm system,fire alarm system and other city or factory flammable and explosive medium to cut 0ff;when the accident hidden danger quickly cut off,to prevent occurrence of malignant accidents.

→主要技術參數

通徑范圍：DN15-DN6OO。

電源電壓：DC12-110V、AC24-220V。

閥體材質：鑄鋼、不銹鋼。

適用介質：燃氣、油、腐蝕流體等。

壓力范圍：0.1-1.6MPa。

溫度范圍：-20+100。

介質粘度：小于50C St(大于時需定制)。

防護性能：防塵、防爆、防水。根據工況選擇。

接線方式：接線座式、引線式、插頭式。

連接方式：法蘭、焊接、內螺紋(外螺紋和特殊接口可定做或加轉接頭)

Main technical parameters:

The size range:DN15-DN600

The power supply voltage:DC12-110V;AC24-220V

The valve body material:steel, stainless steel

Applicable medium:oil,gas,corrosive fluid

尸ressurerange:0.1-1.6MPa

Temperature range:-20+100

The viscosity of the medium:less than 50C St(more than required custom)

The protective performance:dust,explosion-proof,waterproof.According to the working condition

The connection:connection seat type;lead;plug type

The connection:flange,welding,threaded(external Lhreads and a special inter,ace can be customized oradapter)

→工作原理

當電磁一田需打開時，電磁閥線圈先得電，然后把閥頂部的保護套旋下，用力向外拉起手柄，電磁閥打開，然后將保護套裝在原位保護手柄。當電磁閥需關閉時。線圈瞬間斷電。電磁閥迅速關閉。

Working principle: when the solenoid valve is opened, the coil of the

solenoid valve to have electricity, and then the valve at the tap of the

protective sleeve rotation, forced outward pull handle,the solenoid valve is opened,and then the protective suit of in situ protection handle.When Lhe electromagnetic valve is closed,the coil is instantaneously loses electricity,the electromagnetic valve quickl cIose.

→注解 Note

流體中若含有雜質，電磁閥進端必須安裝過濾器，二進一出的工作原理的電磁閥兩進口端壓力不相等時，需加止回閥�？砂惭b止回閥或訂制自帶止回功能的閥門。

if the fluid contains impurities,solenoid valve into the end must be installed in the filter,two into a working principle of the solenoid valve two inlet end pressure is not equal,the need to add check valve.Can be installed check valve or custom comes with a return function of the valve.

德國羅博特（RBT）閥門集團有限公司.上海波昂授權定點公司。